spece30
SpecE30
spece30

Puberty kicked in!

Tell that to my e30. Old tech ftw.  All “stock” power train race series.

First to say: What is wrong with that wheel gap? Is this the US version?

With the amount of grip these cars have. On a yellow he should be able to do any maneuver that he needs to evade. The reason he hit this hard is that he was racing 10/10, when you should be at 8/10 since no one can pass you anyway.

To be honest, if you had pushed Mr. Regular too far, his video would have been way different. It’s not like he would be able to recover a FWD slide.  

Ladida congradulations you have powersteering equiped racecar.

Currently own a Spec E30. Go figure. 

Dual mass is basically transferring the clutch’s springs to the flywheel. You used to be able to replace the clutch and resurface the flywheel. Now you need to replace the flywheel also or risk failure on the second clutch.

Lost it at Iridium spark plugs.

If you have been following F1, this is what Ferrari are doing too.

No chassis are reinforced because Roll cages are installed for safety, but are also attached to the sheet metal of the body all around it.

I agree. For 14$ I can have 2 medium 2 topping pizza’s where I can add my own toppings if I wanted to. Their basic crust is actually really good.

The approach is wrong with these trucks. Electric units should power the trailer not the cab. First there is a lot of space under the container, the shape has always been a brick because of simplicity, so every container would have the same space. Second, it would be retrofitable with current trucks allowing for a

You must know how I feel about this.

Holy shit that interior.

The great Carpocalypse is here.

Its like putting the cruise control on and think you won’t hit the car in front of you.

You are certainly ”doing the right thing”!

Why isn’t this higher. 10 is a little long, but 5S is twice the time and won’t kill a 2 stop strategy. BTW when could softs outlast mediums.

Over the life of a project, tooling & design can be more expensive then buying an expensive part twice.