This woman has my complete and utter sympathy.
Wonderer54
wonderer54
like maybe the Nissan eNV-200?
VFR means Visual Flight Rules - no instruments required. Heads up, look at the ground and sky and fly.
the bit with the ecotec branding is a plastic insert to cover the coil pack - otherwise, it’s the rocker cover
I quite like sitting in competitors cars, and seeing what I know they’ve got wrong - where the engineering team didn’t listen to local feedback, or where they’ve stuck with the way they’ve always done, because there’ll be one stubborn engineer who refuses to update the engineering reference book.
Also allows for a new feature to be added if regulations/the market requires before the full model change
Several reasons:
but did they divert an entire 747 because their shit stunk so much? https://www.vice.com/en_uk/article/someone-did-a-shit-so-bad-a-british-airways-flight-had-to-turn-around-and-land-475
and several key suppliers. For example, the biggest OE maps supplier, major automotive suppliers developing autonomous systems. The blog mentions just startups, but it has companies like TomTom and Inrix which have been established for ages.
yep. It’s called “driving”. never had a speeding ticket.
if I drive at 30mph in 6th, I have less control than if I drive in 4th, as the engine braking effect is diminished if I come off the throttle.
“Was I annoyed when Liberty asked me to step down? No. The way I look at it, if somebody buys a car, they want to drive it. I was a little disappointed because I was asked before they took over, would I stay here for three years if they took over and I said, provided I was fit and competent, yes, I would.
The author has mixed up Catalytic converters, and Diesel Particulate Filters. These collect particulate emissions (fairly nasty), and this restricts the flow through the DPF. Therefore, the particulates have to be removed. One strategy is to inject fuel into the DPF. See regeneration strategies here: https://en.wikiped…
Cd means nothing by itself. Cd*A is your real comparable measure...
bearing in mind I’m not a fastener engineer, and have no experience in manufacturing fasteners, but that process didn’t explicitly show the thread being cut by CNC.