I definitely would...unless I used an Escudo.

Due to several years of Gran Turismo - I can follow along on the track and know where they are! Also:

Mustang = Rustang/Muffstain

Ford Focus = Fuck Us

Skynet is going to start a lot less clandestine than we were led to believe, it would appear. Although - an autonomous combine would almost be as scary as the T-101.

04-06 GTO might do the trick - or a later model G8 GT (not sure of that price range).

For this money, it would need to have a North star swap.

If someone buys one of these, I volunteer to put it on a RC touring car chassis. Then you can zip around carpet or concrete tracks at stupid speeds. Just be careful...this body is probably less forgiving than a typical RC Lexan body.

Read the title and already knew where this was headed. Worse than raising your arms to take off a shirt under a ceiling fan.

I did one of the project in Woodward, OK. So...while that’s not super close to Tulsa, it’s not far either. The longest blade tower I know of (the newer Siemens) has a 120m rotor diameter with a hub centerline height of either 80m or 92.4m. So in that instance, the blade tip is approx 20m or 32.4m off the ground. I say…

Roscoe - near Sweetwater, Tx; Horse Hollow - near Buffalo Gap, Tx; Capricorn Ridge - near San Angelo, Tx; Buffalo Gap (Phase I) - near Buffalo Gap, Tx; and Flat Ridge - near Harper, Ks. This has the most familiar list of places for me. https://en.wikipedia.org/wiki/List_of_w…

Blades don’t weight 80 tons (though an assembled rotor might).

Here’s a few to get us started.

I’ll give that a whirl. It’s going to take me a while to piece together the highlights of 14 gb of wind farm photo/video.

M275 + G class = AWESOME!

Where/what is oppo?

Anyone care for me to come back and do a photo dump of sorts of US wind turbine delivery/assembly? (For 7 years I worked for an energy contractor building the wind farms - when I left, we had built 9 of the 17 largest US farms - I was on 5 of those)

Not every boat goes to the ocean to run 75+ mph.

Too much money for a non-M275 equipped 600.

Thanks a bunch!