ngndznr
NGN_DZNR
ngndznr

Jango Fett is a cruise ship captain?!?!?  Woah!

What’s with the Mercedes center console / infotainment control? Looks like they plucked that right out of the older E-class. Also, will it get a manual, because that’s all we care about anyway.

Kristen go home, you’re drunk.

The stuff from Anker and Aukey has been legit.  No problems there and half the price of the apple stuff.

Now I think you need to explain the reverse situation, Why do Electric Cars use AC motors when the batteries that store the energy are DC batteries. Ready, set, go!

Looks like a BMW version of a Lexus RC-F with a little of Audi S5 thrown in.

I could tell it was a Torch article just by the headline and lead graphic

Is the Ryze Tello a FPV drone or does the camera record to a flash card for viewing later?

Still waiting for Wheeljack to come back as a Lancia Stratos. Then I’ll have faith in the new series!

LOL. I love this story because I lived something very similar. Las Cruces is also call the Land of Enchantment but to me it was the Land of Entrapment. My bro and I were driving cross country when we blew out a tire there. Car didn’t have a spare and we still had the rest of the trip to CA to go. Given it would take

I’m assuming these were pork ribs. What do you suggest temp / times for beef ribs?

Reminds me a lot of the Hennessey Venom...same idea...Elise + Big Motor. Also, curious why he installed the tranny upside down, when I think you should be able to open up the case and flip the diff around so the ring gear is on the other side (for a mid engine vs rear engine). This is a common change for a lot of kit

You were there for 10 weeks and didn’t know about it? What did you do in your off time for 10 weeks because there’s nothing else to do in Midland, except for maybe the Museum of Petroleum, drinking beer, and watching high school football.

Flex w/ the 3.5l Ecoboost Motor. Fast & Weird

Done that drive several times...took about 22 hours with only stops for naps. Too bad you’re not going through Midland, you can stop by the Jim Hall’s / Chaparral Cars museum and the CAF while you’re there.

SEP-IRA is the way to go. The money you put into it is pre-tax and it doesn’t figure into your annual income so you get to keep more of it. Also, it forces you to lock it in until retirement so you’re less inclined to want to tap into it as opposed to a savings account.

Mine has 4screws and I can take the whole light housing off. Then I can properly sand and polish the whole headlight with a small orbital polisher. Much better option than risk hitting the bodywork and burning through the paint (and through the tape). Also makes it easier to get into the corners of the headlight.

Hold the light housing w/ the left hand while wet sanding and polishing with the right hand. Yes using tape is easier but so is doing doing a half-assed job.

Why not just remove the whole headlight and restore it on a bench instead of trying to mask off the bodywork?