Here’s to David getting bitten by the Fiero bug and leaving the Jeep foolishness (and tetanus) behind!

I had colic terribly and both of my boys were diagnosed with milk protein allergy.  So, if your baby has colic symptoms, try to remove all dairy from their or mom’s diet if breastfeeding at all.  That worked wonders.  There is a formula that you can buy that is completely free of milk proteins but it is extremely…

Judd Hirsch was awesome in that movie.  It was him, Will Smith, and Goldblum that made it with just enough Randy Quaid for the ‘Hold my beer’ element that makes it silly enough to not get too heavy unlike another movie like Deep Impact.

Add “Tired/Over-tired” to your list and you’ve got most everything short of an illness or colic/gas/tummy troubles.

I’ve done this in most decent sized airports whenever I’ve had the time and am travelling solo.  MSP is a great airport for this as well.  There’s a bridge between two ends of the airport so you can do it as a single loop that felt like it was about one mile around that loop.  

Ya - Pueblo is a step up from a PBY in size.  It would be like the US putting the Somali pirate vessel from Captain Phillips on display in NY Harbor for tourism.

LEAVE DAVID TRACY ALONEEEE!!!

While I’ve not done the research on it, my anecdotal experience is that I will never buy in a neighborhood with an HOA or even binding covenants. Back in the 80's, my folks built a home in a neighborhood that mandated cedar shake shingle roofs. In my part of the country, they don’t last well, are attractive to silver…

Maybe I’ve just had bad luck but list in my previous Chrysler-variant vehicles has been:

I came down here to say the same thing. Please, for your sanity, go buy that Toyota now. After three Chrysler/Jeep/Mitsu-Chrysler cars, I have to walk back up the road and flag people to slow down before they hit the bridge that’s out.

There are cameras that you can have wired into your power supply - usually if you have a powered rear view mirror or any sort of power near the top-center of your windshield. If I had a performance car or a luxury car I would have that wired in permanently front and back.

Here’s the thing with these trucks - especially in the V8 config. They were fast as hell, super light in the back end, and could steer reasonable well BUT Dodge brakes and transmissions of those years were incredibly poorly designed and almost impossible to maintain.

Not mine, but that is the physical manifestation of Mall Wheel Drive.

That’s what happens when I’m stupidly vague on stuff - I would have called the model you spec’ed as ‘nicely equipped’ with ‘well equipped’ at the Lariat and ‘loaded’ at King Ranch - but that’s just the inner workings of my brain and by no means gospel.

I was looking more at the Lariat model with 4WD. Seems like I can’t swing a dead cat in my area without hitting either one of these, a new GMC truck, or a new four door Jeep Wrangler. That model of F-150 is more like $43-$45k.

Yes - the average monthly car payment in America was $530 dollars as of late last year.

Despite those that huddled near barrel fires during the Leyland days, Lucas smoke is entirely too capitalist to work on this. Need to find some Lada or Zaz smoke.  It’s hard to find - usually in square bottles with left handed threads.

14.7 is about right if your motor is under a bit of load - about 2200 to 2600 RPM.  If that’s the output at idle, it’s a bit higher than what I’m used to seeing.  At idle it’s usually barely over 12 - something like 12.7 to 13.1.  Again, not a HUGE distance away from what you were seeing but possibly high enough that…

My boys are very talkative. One thing that has helped is to ask them to take a bite, chew, swallow, and then they can ask a question or make a statement into the conversation.

I’m with you. I’m very much a DIY person, but that is also because of what my budget allows. But even within large DIY remodel projects I bring in a professional when required or when it gets me to the right spot. I brought in an electrician to help get power pulled for an exhaust fan and to help adjust an issue I…