Finally located and picked up a ProCharger kit for the 2014 RAM 1500 project. We’ve been doing a ton of mods lately on the channel but wanted to really turn things up with the procharger kit. Lots of mods have been happening to the truck and JBA headers and install are also on the way.
Alright guys, finally got around to editing the footage from the Autoform AFR-X install I did on my buddy’s car. Definitely isn’t for the faint of heart but I have done plenty of things like this in the past of different cars and didn’t really concern me too much as long as I double checked my marks and took my…
Who makes these 2 port valve cover vents for a catch can setup? I quickly checked vibrant but didn’t see anything.
Why the hell do vehicles still come with mechanical fans? It’s kind of amusing to see the logic that goes into vehicle that are designed today.
Got around to powdercoating my expensive (but cheaply bought off craigslist) Forgeline wheels after someone graciously ruined them by painting them a FNF scheme.
On Wednesday, I was at the Nurburgring to witness Dominik Farnbacher’s 7:03.45 lap in a factory-stock Dodge Viper ACR. Today, we’ve got the in-car video from that first attempt at a fifth-generation Viper ‘Ring lap record. It’s a wild ride.
Finally got the car out to an event to do a shakedown before I start bringing it to track events. Wanted to make sure overheating was not going to be an issue and it was the perfect day for a torture test. Ambient temps were 110* in the high desert and with not turning the car off between 5-6 runs each time and…
Finally got my wheels back from powdercoating!
Quick video on how to easily repair slightly damaged wheel studs. If your wheel studs are severely stripped or damage do not attempt to repair and you should definitely replace!!!
There are many cases of automotive “who the hell designed this shit” scenarios. From Audi’s that require you to drop the engine to do almost any maintenance, and other modern cars that give no thought or concern to future maintenance.
The Viper is one of these “good luck with that buddy” scenarios when it comes to…
Made a video on my radiator removal & reinstall. Video also shows how bad my OEM rad was clogged/warped and how it looked before and after being “re-cored”.
Strangely a common problem on these cars many owners have where the OEM rad gets clogged from water deposits/buildup.
Maybe the factory filled these cars with horse…
Here is probably the most rediculously cheap mod I have ever done. Purchased LED peanut bulbs for just 10 cents SHIPPED for a pair.
Check out the video to see where I got them and how I modified them to fit my dome lights without having to mess with the factory housings.
Thinking about installing an underdrive pulley? Check out the video!
Check it out!!!
Finally got around to editing the video of the IPSCO solid steering rack
bushings. Another quality part that I would recommend.
Just picked up a set of expensive ass wheels (Forgeline VR1) for my car that someone went through quite a bit of trouble to make ugly as hell!
The wheels were originally polished aluminum
Did some basic maintenance on my Viper ACR. Oil change and lowered the front end a bit more!
Some JEEP content for all you David Tracy fans!
VIDEO IS UP!
Finally got around to changing the fluid in my Dodge RAM with the ZF 8spd transmission.
This is FAR more simple to do than my 09 Hemi with the conventional 5 speed. Less mess, didn’t have to make gaskets and screw around with RTV and was much quicker! Also the exhaust was not in the way of me removing the…
In this video I show how I changed the differential in my Viper to a Mopar Performance 3.73.
Install is pretty straight forward and would be much easier with a lift and power tools but this video shows that it can be done in your own garage.
Check back on YouTube for more videos uploaded every few days! In car review…