I'm not sure why they were so against electric pressure cookers, I got an Instapot for the holidays and the thing is great. It's got all of the same pluses they mention - big heavy stainless steel cooker with thick bottom, but it's a LOT easier to use than a traditional stove top model. Sure, it doesn't hit the same…

I'll parrot what a few others have said, there is no "best" camera. They are tools that depend entirely on what you plan to do with them. I pack very different camera gear for long distance backpacking pursuits than I do for shooting a wedding and different still if I'm shooting macro shots vs long range wildlife…

If you think it's simply the signal not getting where it needs, get a cheap digital multimeter if you don't have one (useful for thousands of projects). Set it to check continuity and put the probes on each end of the signal wiring to make sure that your solder joints have a good connection. Youtube has some great…

If you think it's simply the signal not getting where it needs, get a cheap digital multimeter if you don't have one (useful for thousands of projects). Set it to check continuity and put the probes on each end of the signal wiring to make sure that your solder joints have a good connection. Youtube has some great…

If you think it's simply the signal not getting where it needs, get a cheap digital multimeter if you don't have one (useful for thousands of projects). Set it to check continuity and put the probes on each end of the signal wiring to make sure that your solder joints have a good connection. Youtube has some great…

If you think it's simply the signal not getting where it needs, get a cheap digital multimeter if you don't have one (useful for thousands of projects). Set it to check continuity and put the probes on each end of the signal wiring to make sure that your solder joints have a good connection. Youtube has some great…

If you think it's simply the signal not getting where it needs, get a cheap digital multimeter if you don't have one (useful for thousands of projects). Set it to check continuity and put the probes on each end of the signal wiring to make sure that your solder joints have a good connection. Youtube has some great…

If you think it's simply the signal not getting where it needs, get a cheap digital multimeter if you don't have one (useful for thousands of projects). Set it to check continuity and put the probes on each end of the signal wiring to make sure that your solder joints have a good connection. Youtube has some great…

To clarify, it isn't saving "routes" but you can save entire areas of your maps to Offline mode. You can then make new routes as you need in that area without network access.

Here you go! http://maps.google.com/help/maps/helloworld/android/directions.html#feature-android-offline

As long as you don't change your destination, it caches the info automatically. You can even specifically tell it to save routes in offline mode.

I support hundreds of users and have handled security assessments on dozens of Antivirus / Malware programs. I'm not affiliated with MS in any other way than passing several of their certification classes (but I'm also certified with a handful of others vendors as well).

I respectfully disagree with this practice, as there are several important drawbacks:

I use it extensively to aggregate every piece of information that isn't an actual document. I tracks my receipts, recipes, insurance card info, pet vaccination records, shopping lists - a bit of everything really.

Just stating the obvious, but it IS loaded with cold medicine - something specifically designed to alter the behavior of lung tissue.....

Audio Books - I get motion sickness so reading or anything that involves looking at a screen or keeping my eyes closed is completely out (thus almost all of the suggestions won't help). Audible practically changed my life since I take about six 15 hour+ road trips per year.

There was very little left of his body that survived the transformation to Robocop. I believe in the first movie they show in surprising detail how little biological tissue is left.

From the LH text above: "Lucid Science created two laser microphones; a test system using a visible red laser and a final stealthy version incorporating an infrared laser."

Yes, many of the clones are close to 100% compatible with the brand name Arduinos although they often don't have as robust voltage regulators. Do NOT run a cheap 12volt dc power supply into a knockoff that is rated as 12 volt max input - common power supplies fluctuate a fair amount and could easily spike over 12…

Two quick things: