Normand got to work reverse engineering these components’ systems to write custom software that acted as a CAN bus bridge.
This is not as obvious of an answer as it may sound. If the rotors are spaced away from each other, then yes, thrust will increase proportional to the number of rotors added. However, if the rotors are very close to each other, say touching tips or even intertwining, the thrust produced will not be 1:1 increase…
On the body of the aircraft and the rotors, you have pressure gradients shown in the blue/white/red colors corresponding to low/median/high values of air pressure.
I thought he had posted the wrong pictures when I first read this. I don’t understand the hate at all. This article is pointless.
First, I sincerely thank you for your service. My work is related to the armed forces and I have immense respect for everyone willing to put their life on the line for my country.
Certified motor vehicles and motor vehicle engines and their emission control devices must remain in their certified configuration even if they are used solely for competition or if they become non-road vehicles or engines; anyone modifying a certified motor vehicle or motor vehicle engine for any reason is subject to…
While I agree with your idea, an extreme outcome of this is what is currently plaguing F1. I think there needs to be some form of balance to keep it interesting for the fans.
Welcome to Baltimore. I am in a similar situation as you but am fortunate to have access to a military installation’s DIY auto shop.
I would have rather seen this too. I’ve heard that you can replace individual cells in a used hybrid’s battery pack. Their range on this car is going to be so low.
That’s the same short-term greenhouse gas impact as the emissions from 7 million cars.
Transmissions multiply torque so shifting to a higher gear will increase the torque at the wheels.
That’s your problem. You need Steam to download it.
I don’t understand all of the hate. I think it looks alright.
I would LOVE to have such a modern yet simplistic interior in my MR2. The faux leather vynil it came with is so ugly.
This one is easy for me. Cheering him on at Talladega in 2004. With only 5 laps to go, Gordon was battling Jr. for the lead when a caution came out. The fans initially thought Jr. had won but when Gordon came around in the lead for the final few caution laps to end it, fans started hurling beer cans onto the track.…
Yeah the trigger wheel is behind the pulley. With the pulley on, you can barely see where the wire connects to the bottom of the sensor and the bolts are hidden.
This area has already been thoroughly gentrified.
From what I can tell, I just need to take the A/C belt and crank pulley off. Then it is just two bolts holding it in place. The hard part will be the crank pulley but I’m hoping a breaker bar and blipping the starter will take car of it.