I am intrigued with your analysis and would like to subscribe to your newsletter.

Counterpoint: If you advocate the death penalty as punishment for murder are you allowed to advocate for murder survivors? [survivors family, friends, etc.]

Set condition Zebra throughout the ship! Away the snoopie team!

10/10 would watch!

Not actually, had the driver of that M60 turned and took the barrier at 90 degrees it wouldn’t have gotten stuck. Rookie driver.

I actually got to hang out with some of the Kuwaiti tankers in December of ‘90. I was in the Marines and a tank commander in 1st Tank Battalion, 1st Marine Division. We had a mineplow on our tank so we named it “Minefield Express”. I still remember clearing the two minefields in Kuwait at the start of the ground war.…

Anything but Pine. I refuse to cut any Pine on my table saw or on my miter saw with my good blades. It gums up the carbide teeth and it sucks cleaning sap off tools. Plus, Pine is notoriously bad for painting. I use Poplar or Alder if no other choice is around.

Woodturning is a relaxing hobby of mine. I’ve done pens, wine bottle stoppers, chess pieces, and bowls.

I find her lack of protective eye wear disturbing! I noticed she had ear plugs in though, I guess her ears are more important than her eyes. I watched the entire video and not once did she have on any eye protection. Please do not ever use any power tools without proper eye protection!

I also read this and have a table saw.

No kidding, I was on the Belleau Wood for 2 WestPac’s in ‘87 and ‘89. I was with 1st Tank Battalion. Small world.

Here is the link to my tutorial if you want it:

If I had spare cash laying around I would get a shaper. But for now a handheld powerful router is good enough. For the big bits you really need to have a router table.

Also, use your expensive bits on solid wood, and the cheaper bits on the manufactured wood (like MDF, particle board, etc.) Nothing dulls a bit faster than MDF! I use a diamond hone to keep my bits sharp, but at the end of the day if one of my cheap bits goes dull I just toss it and buy another. My “go to” quality…

Another great use for routers:

Routers are my favorite tool for woodworking. I have 5 of them and I use them all the time. I even made a tutorial on how to make some wall art:

This is exactly what I deal with as a woodworker. I have built a lot of fine furniture over the decades and friends/relatives always ask if I can make them “_____” and how much it would cost. Then they act shocked when it is a whole lot more expensive. My favorite response is, “I can get that for $50 at Wal-Mart?” Of…

Gerber and Pampers to sponsor the 2016 Yunger Games! Available on PayPerView.

Another safety tip, do not stand in the “kickback zone”. If it’s going to fly, let it go. Make sure the area is clear of anything you don’t want damaged or injured.

Never in my life would I make/use a push stick with a hole in it for grip. There is no way I want my finger/thumb trapped inside a safety device. Every push stick needs to be able to be released easily from your grip in case of an emergency. Never fight the saw, you’ll lose. I’ve had a few kickbacks in my 30+ years of…