I don’t think Tumblr survives without AC. By banning it, they’re just putting the barrel in their own mouth.
I don’t think Tumblr survives without AC. By banning it, they’re just putting the barrel in their own mouth.
Yes, a name worse than Abcde.
Why not? Thanks to her mother (or parents?) everybody else is going to; why NOT me? Why not YOU? Why not name the poor kid Meth? Why not name her Welfare? How about Minimum Wage Redford? The therapy is going to cost Mom (and Dad if present) the same as naming her Abcde, or even Abcdefghij Klmnopqrtstuv Wxyz. So what’s…
THAT’S not a K&N. Or any OTHER oiled cotton filter. It’s a open paper cone filter. Paper. Why paper? because paper doesn’t foul MAFs, or allow large particulates to pass.
Boosted LSx swapped Solstice.
ASE Master here...
Point out to everyone that this is the new RWD based Explorer, not the FWD based one from the last couple years. So, yeah.
This. Mostly.
Just
RTFM!
Don’t take this the wrong way, but this vehicle isn’t worth anything. Or, at least not enough to trouble yourself about a numbers matching engine. Get a solid core engine and go through it while the snow has us all trapped inside, and when the construction cones start blooming again, swap it out.
I want to know what happens when you have to stop that soda can with 700 kilos on it. Then again, perhaps we’re not talking about speeds at which one need fear death and dismemberment. 16hp isn’t exactly adequate to get that 700 kilos, and the soda can you’ve placed it on, up to a cruising speed north of that which…
When applied to Stoptech parts, yes; Stoptech parts are very high quality, and if you have brake pulsation, it’s probably rust on the hubs or uneven wheelnut torque, or maybe even hub runout.
As a point of fact, they’re cast iron; not steel. I agree though, the cheap ones don’t have strength, and all cast iron is not equal. Chinese iron doesn’t absorb or radiate the heat evenly. We used a thermal cam at our shop to compare OE to Chinese and found that the OEs were evenly heated while the Chinese parts…
I didn’t know there were that many people who still give a shit about Madden.
Can we as a people define some terms and agree on them? That people are going off and doing this kind of shit is bullshit, but I’m reading around, and some outlets are saying “Massacre”. Pulse was a massacre, Vegas was a massacre. There are 2 dead here (perps don’t deserve to be counted). 2 more than there should be,…
It’s crazy, really, that the TX3 4wd came first with everything that makes an Evo an Evo, but Mitsu came with it bigger and it stuck. Now, everyone everywhere knows what an Evo is, but very few outside of Oz know what a TX3 is.
I’ve wanted to find a really clean 2nd gen Escort GT like this and powertrain/driveline swap it from an Aussie Laser TX3 for a long time. Get the engine/trans/PTU and necessary rear suspension bits from a TX3 of the same generation, then do some boost/induction work, some exhaust work, but keep it looking and sounding…
Or any Corvette produced before 63...
Here in Michigan, the Salt Fairy is mercifully freeing us from them. I’ve only seen maybe 2 in the last year, and both times I had to avoid the chunks of them that were falling off as they drove.