I came here for exactly this. Thank you.

.

That’s true. It is.

And could I get out of the grays someday? Pretty please?

Nitpicking here, but I thought I had heard that the B-2 by itself was more than a billion dollars per example, since they reduced the original order? Correct me because I’m probably wrong.

So just, Rocket all the things? Why was I not a military engineer/pilot in the ‘60s?

I did it at age 21 with less than 100$. I say do it! I’m an older dad now and I can’t.

Does she look like adult actress Lisa Ann?

came here for this

It’s not very hard to hold back the depth of water from the tailgate. One person can do it and let it out slowly.

You have to flush the antifreeze from it, remove the thermostat (Cold water intake makes it think the engine isn’t warm yet = no flow through), and use a booster pump cheap marine bilge pump) to prime the system because the ordinary water pump can’t pull enough suction.

Yes. Any bilge pump from a boat is easy to wire up. Same goes for the strainer that most boats have for their water intake (to cool).

A simple sheet of landscaper’s pondliner can go across there and seal itself. Basically a thick garbage bag. Does not have to be complicated. Have built a truck hot tub. Can confirm.

Use jackstands under the frame. Not an issue. From experience.

It can be done! I did it with not a lot of mechanical skills and a leased Dodge Dakota! Go have fun!

Go to your local marina and get a bilge pump. Many will run off of the lighter in the cab. Wakeboard enthusiasts know that they make a lot of models that will more than handle the load. But yes your normal water pump can’t pull the suction.

I can confirm. I flushed the engine on a 4.0 liter Dodge Dakota to run mine through the engine. Took out the thermostat. Took HOURS of idling. Worth it to a college age guy.

I forgot about POLAR! Life was pretty good back then.

Do you have the old Save the Enzos one? #OG #Jalop4Life

I look at almost as many boats as I do cars. It’s a sickness.